16
By default, the audio and video will be set to ‘passthrough’ in this mode no transcoding is
performed, alternatively you can choose to transcode the source audio and or video. Please note
that if the source is MPEG2 you must transcode the video and audio.
Convert TS Audio
– Should be used when the source has MPEG TS audio and audio is set to
passthrough.
For details of transcoding options please see the
transcoding and encoding
options section of this
guide.
Decklink Source
Here you can use an input card from Blackmagic Design to feed the channel directly from HDMI or
SDI sources. We currently support all Blackmagic Decklink, mini monitor and mini recorder cards
using the Desktop video 10.8.4 or newer driver version.
Please Note:
You must ensure you select the correct resolution and frame rate to match your input
signal, failure to do so will result in colour bars being displayed as the live stream. If your card
features HDMI and SDI inputs you must use the Blackmagic Desktop Video Utility to set the input
type outside of the DVS-200 software.
