Datasat AP20, Installation And Operating Manual

Page: 26 / 32

AP20 Installation and Operating Guide Page 43
AP20 Installation & Operating Guide Document # 9301H39200 Ver. 1.1
2.16 AP20 Playback Sound Check
After installing and setting up the unit—or doing a maintenance check—it is a good idea to
play content and stand in the theater while listening to the first few minutes of the movie.
Check for the following

The overall sound level is comfortable and balanced.

The soundtrack quality is excellent and does not include extraneous noise.

The dialog is in sync with the picture being projected.

The surround speakers are heard at the correct level. (Please note that not all scenes will
have surround material.)
To adjust the overall sound level in the theater, adjust the main fader on the audio processor.
3.0 How-To Procedures for Setup
This table provides a list of setup activities and provides instructions or a link to instructions elsewhere
in this manual.
Table 11. Setup Procedures
ACTIVITY INSTRUCTIONS
Assign a Format button See 4.3.4 Assign Format Buttons, page 61.
Unassign / delete a Format
button
See 4.3.4 Assign Format Buttons, page 61 – select the button
and assign a “blank” format to it.
Configure power-on Format
(Startup Format)
See 4.3.2 Startup Format, page 59.
Assign fader level to a Format
or set global fader for all
Formats
See 4.2 System Setup Screen, page 49 topic “Fader Control”,
and see 4.2.1 Assign Fader Level to a Format, page 50.
Create a Format See 3.1 Example: Creating a Format, below.
For detailed information about Formats, see 2.6 About Formats,
page 28.
Assign Channel Names and Vu
meters
See 4.3.8.3 Channel Names, page 75.
Set Non-sync Level and Non-
sync Routing
See 4.3.6.3 NonSync Level and Routing, page 65.
See also 4.2.1 Assign Fader Level to a Format, page 50.
USB Save / Restore / Load See 4.2.3 Saving and Restoring Configuration Files, page 54.
Load a personalized screen
saver
See 4.2.3 Saving and Restoring Configuration Files, page 54. To
set screensaver time and mode, see 4.2 System Setup Screen,
page 49.
Set up Global Audio Delay for a
format
See 4.3.6.1 Global Delay, page 64.
Set up Multiple Surround
Channels
For digital cinema format, see 4.3.6.2 Extended Surround
Options, page 65.