Datasat AP20, Installation And Operating Manual

Page: 17 / 32

AP20 Installation and Operating Guide Page 24
AP20 Installation & Operating Guide Document # 9301H39200 Ver. 1.1
2.0 Installation and Set Up
2.1 Installation Checklist
This checklist summarizes the installation and setup procedures for the AP20.
Table 3: AP20 Installation and Setup
Completed Task Description Refer to:

Install AP20 in Equipment Rack Chassis Rack Mounting and Connection,
pg. 27
CONNECT CABLING:

Power Cable

Audio input cables to AP20 (Depends on audio sources)

Audio output cable from AP20 Analog Out
to Audio Power Amps
Appendix B, Interface Wiring Diagrams.

Automation cabling Appendix B, Interface Wiring Diagrams.
ADJUST AND TEST

Theater Equipment Check Check speakers, amplifiers, auditorium
conditions
Theater Equipment Check, pg. 32

Assign channels On AP20: Menu > Format > Channel
Profile > Channel Names
Assign Channels on AP20, pg. 33

Verify channel assignments Listen in auditorium
Verify Channel Assignments in
Auditorium, pg. 35

Set levels to establish a baseline Set levels to establish a baseline, pg. 37

Perform the EQ Perform the EQ, pg. 38

Perform Subwoofer Parametric EQ Subwoofer EQ – Parametric EQ, pg. 40

Final Adjustments (fine tuning) Final Adjustments, pg. 42

Verify Sound Performance Listen in auditorium

Set up macros for automation Creating a Macro, pg. 80
SYSTEM SECURITY

Save AP20 configuration to USB flash
drive
Saving and Restoring Configuration
Files, pg. 54

Set Password to Prevent Unauthorized
Access, if Appropriate.
Access Control, pg. 56