AP20 Installation and Operating Guide
Page 19
AP20 Installation & Operating Guide
Document # 9301H39200 Ver. 1.1
Figure 7. Fader Muted
1.4.2
Booth Monitor Volume
When an external powered speaker is connected to the AP20, the level can be controlled using the
monitor volume. To adjust the booth monitor volume, touch the
Monitor
button. The screen shown in
Figure 7 will appear. Touch the + or – buttons or the control knob to raise or lower the volume.
Touch the
Mute
button to mute/un-mute the booth monitor.
Touch the
Mix
button to select a channel and adjust the volume from 0 to 10. See Figure 9,
below.
Touching the
Close
button will close this screen. The Monitor Volume window will close if
not used within 5 seconds.
Figure 8. Monitor Volume
