Dataradio GeminiG3, User Manual, Page: 35 / 57

120 20130-101a GeminiG3 – 700MHz User Manual 26
4.7.3.6 Setup (Advanced)
►
IP addressing
Figure 19 - Advanced IP Configuration – IP adressing modes
Item Description
Directed Broadcast
Disabled, Enabled (Default) – Controls forwarding of
Directed Broadcast packets
Broadcast
Limited Enable
Disabled (Default), Enabled – Controls forwarding of
Limited broadcast packets
Multicast
Disabled (Default), Enabled – Controls forwarding of
Multicast packets (based on the “Multicast Address
List”)
Outbound unit address Multicast address associated to remote unit
Multicast Address List –
Add / Delete Address
Select the Add button and type in the dialog box the
new address to be added to the “Multicast Address
List”
Select the Delete button and type in the dialog box the
address to be deleted from the “Multicast Address
List”
Multicast
Multicast Address List
Read-only listing. Window expands downward as
needed to show all addresses in the list.
When an IP packet is received on the Ethernet side of
the unit and the destination IP address matches one of
the multicast IP addresses in this list, it is forwarded
over the RF interface.
Remote units will send it over their Ethernet interface.