120 20130-101a
GeminiG3 – 700MHz User Manual
19
4.7 Advanced IP Settings
4.7.1 Unit Status
Displays values that identify the unit and show its basic operating condition.
4.7.1.1 Unit
Status
Figure 10- Unit Identification and Status
Item
Description
Banner
Displays GeminiG3 software revision information retrieved from the connected unit.
Have this information handy if contacting Dataradio support.
Station Name
Displays name of connected unit.
Configured under Setup Basic
General
Station Name
System ID
Displays System’s unique identification number
Configured under Setup Basic
General
System ID
Local Time
24-hour clock format display of the GMT time and date adjusted to the specified time
zone.
Configured under Setup Advanced
Time Source
SNTP
Position (GPS)
Global position in Longitude (East-West) and Latitude (North-South) displayed using
information obtained from a GeminiG3 unit (except “Lite” model) decoding a valid
GPS input signal.
Position with “(Last known)” displayed underneath indicates that the GPS data is
either old or not enough satellites signals are present to achieve a valid location
computation. If no “Last known” position was obtained, display shows (Unknown).
E.g. : Longitude of 73 degrees, 39 minutes and 45 seconds West would appear as:
073 39.7500 – W
Status
Displays “Initializing” at startup, “Registered” in normal operation and “Roaming”
while attempting to register to another base station.
2005-11-03 14:45:19
