120 20130-101a
GeminiG3 – 700MHz User Manual
23
4.7.3.2 Setup
(Advanced)
►
RF (IP)
At the time of manufacture, each Paragon3 base station and Gemini G3 mobile is provided with a unique
MAC address for its Ethernet and RF interfaces. These addresses cannot be changed. The RF interface is
also provided with a unique Factory RF IP address. If this IP address conflicts with any existing IP net-
work, it can be overridden.
Figure 15 - Advanced IP Configuration - RF (IP)
Item
Description
RF MAC
RF Interface MAC address in HEX format (factory-set).
Displays factory-assigned address: nnn.nnn.nnn.nnn “Factory”
RF IP Address
Entering 0.0.0.0 sets the RF IP Address to the factory default and highlights the
“Factory” name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the factory
default and highlights the “Override” name (active address)
RF Net Mask
Set to valid common IP netmask for all units within a GeminiG3 network
RF MTU
RF Interface MTU - Default 1242. – For optimal performance, set to 1242.
Entering a value lower than 1242 may reduce system performance. Flexibility of
using other values may be useful in testing or for particular operational conditions.
Range is 576 to 1500.