120 20130-101a
GeminiG3 – 700MHz User Manual
18
User Name field can be left blank. It only serves to identify the person gaining access.
Password is common and affects all User Name entries.
4.6 Interface
Important note:
Record all original GeminiG3 unit factory settings for possible future use.
Note:
Screen captures used throughout this document may vary from actual screens.
The GeminiG3 user interface is used to configure and view your network settings. To navigate, use the
top-level menus on the left, some of which expand to offer submenus, and display the first submenu in the
right-hand frame. Click the current submenu entry to refresh the right-hand frame. The interface main
screen lists available selections for the selected menu or presents instructions.
4.6.1 Apply, Cancel, Save Config, and Reset Unit Buttons & Help Icon
Several submenus have “Apply” and “Cancel” buttons.
The navigation area has “Save Config”, “Reset Unit” buttons and a Help icon.
Make an entry into a dialog box. When satisfied, click on Apply to
temporarily apply the value(s) entered to the relevant parameter(s). If not satisfied, click on Cancel button
to restore to the value(s) present before a change was made.
Note:
Cancel command only affects the dialog boxes or radio buttons in the opened window.
If needed, go to other submenu(s) and make more entries. Click Apply before leaving each window.
When finished, click the Save Config button to make all changed entries permanent.
Notes:
Failure to use the “Apply” command button before leaving a web page will result in the loss of tem-
porarily entered selections, addresses, and values.
Failure to use the “Save Config” command button before doing a Reset Unit will result in the loss of
temporarily entered parameters.
Click on Save Config button:
•
If there are changes to be saved, saving occurs automatically.
•
If there are no changes to be saved, a window prompts user to confirm saving.
Click on “Reset Unit” button:
•
If there are changes to be saved, a window prompts user to confirm resetting.
•
If there are no changes to be saved, resetting occurs automatically.
A “Station Reset” 20-second timer counts down while the status reports: “Working…”
When done, the status reports: “Ready”.
At any time, click the Help Icon in the navigation pane to open a help text relating to the window being
displayed.