Cabling
Cabling
5.4.4 How to disable the Control Screen
If you do not require a control screen then you should disable the integrated graphics in the system BIOS. See the
motherboard documentation for detailed instructions.
VSN400
Onboard Graphics Device.
HDMI/DisplayPort
5.5 Connecting Power Cables
This section applies to both the RPSU and the ATX powered systems.
Connect power cables
Only use the power cables supplied with your system, for advice on replacements please contact Datapath.
Ensure cables are fully inserted into the power supply sockets, failure to do so could result in the cable becoming dis-
lodged and the system inadvertently shutting down.
In systems with an RPSU, both cables must be connected otherwise an audible alarm will be triggered when the
system is switched on.
Control
Screen
22
