Operation
Operation
If you chose to have the DDCT configure your wiring then the page will display the recommended connections, as
shown above. You can print a copy of the wiring diagram using “Print a Wiring Diagram”.
Note: The Datapath Diagnostic Suite must be installed to print a wiring diagram.
To manually select the outputs right click on the display group and select “Edit”, you can then select each individual
display and allocate your preferred output . Right click on a selected display to reveal the list of outputs available:
6.3.12 Wiring
How do you want to wire up your wall controller?
The DDCT can recommend the best wiring configuration for your system, ensuring the load is balanced between the
graphics hardware. Click on “Recommended” for the optimal configuration for your system.
Should you wish to manually wire your system and decide for yourself which output is connected to which display,
click on “Custom”. See Chapter 5 to determine the connection combinations available.
You will then be presented with the Summary Page:
32
