6.4.1 WallControl 10 Server
The WallControl 10 Server is used to display Vision/IP and application windows. The Server element of WallControl 10
needs to be installed on the machine to which your video wall is connected.
6.4.2 WallControl 10 Client
The WallControl 10 Client should be installed on the machine that has been identified to control the display wall. This
could be any machine on the network including the machine driving the display wall. The application element of
WallControl 10 is used to control the position, size and properties of each window displayed on the Server machine.
The WallControl 10 Client can be installed on systems running up to and including Windows 10 Operating Systems.
6.4 Opening WallControl 10 (Optional)
WallControl 10 is an optional video/display wall management software application specifically designed for Datapath
Wall Controllers. WallControl 10 consists of two separate elements that work together to enable you to control the
display wall, the Client (application) and the Server.
Start | All Programs | WallControl 10
The WallControl 10 Start Menu has four options, WallControl 10 Client, WallControl 10 Server, WallControl 10 Securi
-
ty Server and WallControl 10 Security Administration Client.
6.4.3 WallControl 10 - Server
The Server is the machine that drives your display wall, a Server can be located locally or via a network. WallCon
-
trol 10 will automatically seek out and display all servers available to you. Each server can run multiple display walls
depending on the version of WallControl 10 you have. Before opening the Client interface you will need to start the
Server by clicking on it in the Programs menu. The WallControl 10 Client will only detect Servers that are running.
Operation
Start | All Programs | WallControl 10 | WallControl 10 Server
6.4.4 WallControl 10 - Client
WallControl 10 Client refers to the application that connects to the available servers.
6.4.5 WallControl 10 Security Server
The WallControl 10 User Rights Management application has a dedicated server that must be loaded prior to using the
Security Application Client. Starting the WallControl 10 Server will load both the Server and Security Server. Both
servers launch automatically when the system is booted, however to launch both servers manually, go to:
Operation
35
