DataMetrics 2000 Series, Operation And Maintenance Manual

Page: 32 / 46

MODEL 2000 PRINTER OPERATION AND MAINTENANCE
DataMetrics Corporation 24
Table 4-1. Controls and Indicators
Identification Description Function
Circuit breaker switch When placed in the “on” position, prime power is
applied to the printer.
ON LINE Indicator Illuminates when the printer is in the on-line state.
SUPER QUIET Indicator Illuminates when the Super Quiet mode is enabled.
Super Quiet mode is enabled/disabled by
simultaneously pressing the ON LINE and TEAR
OFF switches.
POWER
PAPER OUT
Indicator Illuminates steadily when prime power is applied;
indicator blinks when the paper supply is exhausted.
Note that when a paper-out condition occurs while a
page is being printed, press ON LINE repetitively to
continue printing to the end of the page.
ON LINE Momentary pushbutton
switch When pressed, the printer toggles to the on line/off
line state.
TEAR OFF Momentary pushbutton
switch When pressed, paper is advanced to the “tear”
position. When the switch is pressed a second
time, paper advances to the first print line. Note
that this function is usable only when the top cover
of the printer is open.
LF/FF Momentary pushbutton
switch
When pressed once, the paper advances one line.
When held in the depressed position, the printhead
is centered and the paper is advanced to the top of
the next page.
When pressed in conjunction with the ON LINE
switch, paper advances one micro line (1/180”).
When pressed in conjunction with the LOAD PARK
switch, paper reverses one micro line (1/180”).
When LF/FF and ON LINE/LOAD PARK are held in
the depressed position, the paper will continuing
advancing/reversing until the switches are released.
If released within 5 inches of the top of the page,
the position will be stored as the “top of form”.
LOAD PARK Momentary pushbutton
switch When pressed the first time after the unit is powered
up, paper advances to the first print line. When
pressed a second time, the paper reverses to the
“park” position.