manualshive.com logo in svg

DataMetrics 2000 Series, Operation And Maintenance Manual

Share
Download
DataMetrics 2000 Series Operation And Maintenance Manual Download Page 27

MODEL 2000 PRINTER

 

OPERATION AND MAINTENANCE

 

DataMetrics Corporation 

19 

 

 

3.7. Software Installation 

The Model 2x00 printer will operate with any Windows-based (3.x/95/98) computer.  The 
software installation procedures defined in the following paragraphs are tailored for 
Windows 95/98 installation. 
 

NOTE 

PRINTER SOFTWARE IS PROVIDED ON 1.44 MB DISKETTES.  IF THE 
HOST COMPUTER DOES NOT INCLUDE A DISKETTE DRIVE, THE 
SOFTWARE MUST BE TRANSFERRED TO THE HOST STORAGE MEDIA 
USING SUPPORT EQUIPMENT THAT INCLUDES A DISKETTE DRIVE. 

 
Follow the steps defined below to install the printer driver.   

a. Verify that the printer is connected to a Windows-based computer that is powered up 

and configured for normal operation. 

b. Verify that the printer is powered up and on line. 

c.  At the Windows main screen of the host computer, select 

Start

 – 

Settings

 - 

Printers

. 

d. Select 

Add Printer

 and then 

Next

. 

e. In the Manufacturer column, select “Panasonic”. 

f.  In the Printers column, select “Panasonic KX-P2130”. 

g. Insert the Panasonic Setup disk in the diskette drive and select 

Have Disk

. 

h. Enter the directory path where the software resides and select 

Ok

 twice. 

i.  Verify that “Panasonic KX-P2130” appears in the dialog box and select 

Next

. 

j.  Chose the port to be used (default LPT1:) and select 

Next

. 

k.  Enter a printer name (arbitrary designation). 

l.  Chose a printer use designation (default/non-default) and select 

Next

. 

m. Chose if a test page is desired and select 

Finish

. 

3.8. Setup Utility 

Follow the steps defined below to configure operational parameters for the printer using the 
Setup Utility. 

a. Verify that a parallel interface cable is installed between a Windows-based host 

computer and the parallel port of the printer. 

b. Power up the host computer and printer.  Verify that the printer is on line. 

c.  At the Windows main screen of the host computer, select 

Start

 – 

Run

. 

d. Insert the Setup disk in the diskette drive. 

e. Enter the directory path where the software resides and select 

Ok

. 

Summary of Contents for 2000 Series















































Reviews:

No comments

Brands by name

Popular brands

Load more brands