Datamax RL4 User Manual Download Page 42

Page: 42 / 66

A-2

Communications

Serial Interface

RS232, up to 460.8 kbps

USB Interface

2.0 (full speed)

Bluetooth Interface

Supported versions: Version 2.1, Class 2; Serial port profile

Wireless LAN

Network standard: IEEE 802.11 a/b/g

Wireless access modes: Infrastructure and ad-hoc

Security Protocols: WEP (64/128), WPA (TKIP/RC4), WPA2 (CCMP/AES)
Authentication: LEAP, EAP-PEAP, EAP-FAST, EAP-TTLS, EAP-LEAP:

Network Support

DHCP, TCP, UDP, DNS, BOOTP

Power Source

Battery

14.8V Lithium-ion, 2200 mAh (33 W-h)

DC Inputs

External DC jack, 11-15V, built-in spike and surge protection

External charge contacts, 11-15V, built-in spike and surge protection

Recharging

4 - 6 hours

Endurance

Prints over 320 4”x6” (100x150mm) labels when operating 16 continuous
hours on an 802.11 network

Barcodes/Fonts/Graphics

The printer is equipped with the most popular industry fonts and bar codes; see the

Programmer’s Manual

for full listings and detailed information.

• Scalable Fonts:

- CG Triumvirate

Bold Condensed, CG Triumvirate & CG Times with Cyrillic, Greek, Arabic and Hebrew

character support from Monotype Imaging

• Standard fonts:

- 5.5CPI, 7.2CPI, 10.2 CPI, 10.7CPI, 18.5CPI 20.4CPI, 22.6CPI, 34.0CPI, OCR-A, OCR-B (additional fonts
available)

• Downloadable font types:

- True Type, Bitmap

• Character Sets:

- Unicode/UTF8 support; 50 international symbol sets, Big 5, JIS and Shift JIS and more

• Optional characters:

- Arabic, Greek, Hebrew, Unicode subset including Latin

- Asian (including Big 5, Simplified Chinese, Kanji, Hangul and Shift JIS); additional international
characters available

• Barcodes:

- Linear: Codabar, Code 3 of 9, Code 93, Code 128, EAN-8, EAN13, Interleaved 2 of 5, HIBC, PLESSEY,

MSI/Plessey, UCC/ EAN-128, UPC-A, UPC-E, UPC 2 and 5 digit addendums, Postnet, Telepen, UPS

MaxiCode, FIM, USD-8
- 2D Symbologies: PDF417, Aztec, QR Code, GS1, Datamatrix, TLC39, MicroPDF417

• Graphics:

- Supports storage of graphics/logos in Flash memory and transient “print once” graphic

Summary of Contents for RL4



































































Search results

Summary of Contents for RL4

Reviews:

Related manuals for RL4

Brands by name

Popular brands

Datamax RL4, User Manual

Search results

Summary of Contents for RL4

Reviews:

Related manuals for RL4

Brands by name

Popular brands