Instruction
Manual
SE4-Plus
Series
36
6.4. Reset function
The light curtain has a Reset function that is activated
consequently to an internal failure. The operator has to press the
TEST/START button resetting the break condition and thus return
to normal functioning.
The button has to be kept pressed for at least 5 seconds in one of
the following conditions:
-
Output failure;
-
Optic failure;
-
EDM test function failure;
-
Teach-in Blanking failure.
Temporal diagram of the Reset function
6.5. EDM function
The External devices monitoring (EDM)
function controls external devices by
verifying the OSSD status.
To correctly use this function:
-
select it using the specific dip-switch;
-
connect EDM input to the 24Vdc N.C.
contact of the device to control.
