Instruction
Manual
SE4-Plus
Series
66
Connection cables
MODEL DESCRIPTION
CV-A1-22-B-03
Axial shielded 4-pin 3 m cable
CV-A1-22-B-05
Axial shielded 4-pin 5 m cable
CV-A1-22-B-10
Axial shielded 4-pin 10 m cable
CV-A1-22-B-15
Axial shielded 4-pin 15 m cable
CV-A1-22-B-25
Axial shielded 4-pin 25 m cable
CV-A1-26-B-03
Axial shielded 8-pin 3 m cable
CV-A1-26-B-05
Axial shielded 8-pin 5 m cable
CV-A1-26-B-10
Axial shielded 8-pin 10 m cable
CV-A1-26-B-15
Axial shielded 8-pin 15 m cable
CV-A1-26-B-25
Axial shielded 8-pin 25 m cable
CV-A2-22-B-03
Radial shielded 90° 4-pin 3 m cable
CV-A2-22-B-05
Radial shielded 90° 4-pin 5 m cable
CV-A2-22-B-10
Radial shielded 90° 4-pin 10 m cable
CV-A2-26-B-03
Radial shielded 90° 8-pin 3 m cable
CV-A2-26-B-05
Radial shielded 90° 8-pin 5 m cable
CV-A2-26-B-10
Radial shielded 90° 8-pin 10 m cable
Master Slave connection cables for Cascade versions
MODEL DESCRIPTION
CV-A1-23-B-0005-2F
5-pole M12 double connector with 0.5 m cable*
CV-A1-23-B-01-2F
5-pole M12 double connector with 1 m cable*
SE-C
5-pole M12 connector for Master termination**
* 0.5 m or 1 m shielded cables with 5-pole M12 connector for the Master and Slave connection
must be ordered in combination with the
SE4-PLUS Cascade
light curtains.
** The 5-pole M12 connector for the Master termination (SE-C accessory) has to be connected
instead of the Slave during the alignment phase of the Master unit.
Once aligned and definitively mounted, the Master has to be disconnected from the SE-C
termination connector. The Slave has to be then connected and aligned.
Moreover, the termination connector has to be definitively inserted if a Master couple is to be
used singularly, that is without a Slave couple.
Note: a couple of SE-C termination connectors are supplied with
SE4-PLUS Cascade light curtains.
