Datalogic QuickScan I QM2131, Product Reference Manual

Page: 42 / 362

Enter/Exit Programming Mode Intercharacter Delay
32 QuickScan™ I QM21X1 / QBT21X1
Intercharacter Delay
This parameter specifies the intercharacter delay between the end of one char-
acter and the beginning of the next. The delay can be set within a range of zero
(0) to 990 milliseconds in 10ms increments. A setting of zero specifies no
delay. See
"Intercharacter Delay" on page 278 for more detailed programming
instructions.
$CR2IC00 
Intercharacter Delay = No Delay
$CR2IC
Select Intercharacter Delay Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
~
CANCEL
DEFAULT
00 = No Intercharacter Delay