Datalogic QuickScan I QM2131, Product Reference Manual

Page: 325 / 362

Product Reference Guide
315
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of
Table 26. The settings in this table are as applied to a standard RS-232 inter-
face. See Table 27 for a listing of default exceptions to this list as appled to
other interface types. Page references are also provided for feature descriptions
and programming bar codes for each parameter. A column has also been pro-
vided for recording of your preferred default settings for these same configu-
rable features.
Table 26. Standard Defaults
Parameter Default Your Setting
Global Interface Features
Host Commands — Obey/Ignore Obey
USB Suspend Mode Disable
RS-232
Baud Rate 9600
Data Bits 8 Data Bits
Stop Bits 1 Stop Bit
Parity None
Handshaking Control Disable
RS-232/USB-COM
Intercharacter Delay No Delay
Beep On ASCII BEL Disable
Beep On Not on File Enable
ACK Character ‘ACK’
NAK Character ‘NAK’
ACK NAK Timeout Value 600 ms