Datalogic PowerScan PD9530, Product Reference Manual

Page: 251 / 362

Enter/Exit Programming Mode
Product Reference Guide 241
BC9xxx Base
The BC9xxx can be changed from Normal to Compatible mode using the
Aladdin configuration tool. See "Datalogic Aladdin™" on page 6 for more
information. This will allow you to Join or Bind a PM8500 to your BC9xxx.
Changing from Compatible Mode back to Normal
PM9500 Handheld
1. With the PM9500, read a Compatible mode programming label on
page 240 with a value of “Low, Medium, or High Speed”.
2. With the PM9500, read the Unlink programing label.
3. Now you can link your PM9500 to a BC9xxx in normal mode; the
PM9500 will inherit the programmed speed from the BC9xxx.
BC9xxx Base
1. Using Datalogic Aladdin, change the Compatible Mode parameter to
“Low, Medium, or High Speed”.
2. Now you can link a previously unlinked PM9500; the reader will inherit
the speed programmed in the BC9xxx.
If Aladdin is not available, use the following procedure:
1. With a PM9500 in normal mode, read the Unlink programming label on
page 19 , then read the following bar code:
Return to Normal
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
2. Place the same PM9500 on your BC9xxx.
Your BC9xxx will link to the PM9500 and will inherit the reader’s pro-
grammed speed.