Datalogic PDA, User Manual

Page: 73 / 100

User’s Manual 61
Appendix B
DHCP Server Setup
Setting up your DHCP Server
In order for FMU to be able to use DHCP Discovery, the network DHCP
Server must be configured to provide an FMU server address. To set up your
DHCP Server to supply the FMU Server information to each terminal, you
will need to add a new DHCP option.
Option “233” is the default option used by the terminal if FMU DHCP Dis-
covery is enabled. This option should contain the string “FMUserver”, where
server is either the IP address or hostname of the FMU Server where auto-dis-
covering terminals will associate (for example, FMU127.0.0.1). See
“Enabling
Terminals for RF Connectivity” on page 52 for details on setting up a terminal
for DHCP.