GETTING STARTED
3
1
1.5 WEDGE
The LYNX™ Reader requires the Wedge interface cable and the AC/DC power
adapter to be connected.
To install your reader to your host system, follow these instructions (see Figure 2
below).
1. Insert the cable into the bottom of the handle of the LYNX™ reader;
2. Connect the cable to the power cord;
3. Connect the AC/DC power adapter at the wall outlet;
4. Once the reader is turned on, connect the WEDGE interface cable between the
keyboard and the host terminal;
Figure 2 - Wedge Connection
CAUTION
When not using the Lynx™ reader remember to disconnect the
Wedge interface from the PC before disconnecting the power cord.
NOTE
While using the Lynx™ it is always necessary to use cables
adopting an external power supply.
Summary of Contents for Lynx D
