Datalogic Lynx D, Instruction Manual

Page: 28 / 128

LYNX™
12
2
2.1 DEFAULT SETTINGS
Configuration Field Default Setting
RS232 Communication
Baud Rate 115200
Parity, Data Bits, Stop Bits No parity; 8 Data bits; 1 Stop bit
Handshake None
Protocol None
FIFO Enabled
Intercharacter Delay
0
RX Timeout 10 seconds
Intercode Delay 0
WEDGE-Communication
*Keyboard nationality USA
CapsLock OFF
NumLock OFF
Intercharacter Delay
0
Intercode Delay 0
Operating Mode
Operating Mode Normal Mode
Data Format-Symbology Independent Parameters
Code Identifier Disabled
Code Length Disabled
*Header No headers
*Terminator CR and LF terminators for RS232
ENTER terminator for Wedge
Data Format-Symbology Dependent Parameters
Custom Code Identifier Disabled
Symbology Specific Format Select All
Header Symbology No headers
Terminator Symbology No terminators
Symbology Character Substitution No character to substitute
Symbology Character Deletion No character to delete
Data Format-Concatenation
Concatenation Disabled
Define Concatenation
2EAN/UPC codes concatenated
Set First Concatenated Code Length 000 = any length
Set Second Concatenated Code Length 000 = any length
Set Third Concatenated Code Length 000 = any length
Set Fourth Concatenated Code Length 000 = any length
Concatenation with Intercode Delay Disabled
Concatenation Timeout 10 seconds
* The default values of these parameters are set when reading the interface
selection.