Datalogic Lynx D, Instruction Manual

Page: 31 / 128

CONFIGURATION USING BARCODE SYMBOLS
15
2
Configuration Field Default Setting
MaxiCode
Mode 0 Disabled
Mode 1 Disabled
Mode 2 Disabled
Mode 3 Disabled
Mode 4 Disabled
Mode 5 Disabled
Mode 6 Disabled
QR
Selection Enabled - normal & reverse
AZTEC
Selection Disabled
Postal Codes
Selection Disabled
Reading Parameters
Trigger Mode Trigger level
Trigger Type Normal trigger
Flash ON 2 sec
Flash OFF 2 sec
Beeper Tone Tone 1
Beeper Volume High volume
Beeper Duration 50 ms
Read per Cycle One read per cycle
Scan Timeout 5 sec
User Defined Beeper Tone Tone 1
User Defined Beeper Volume High Volume
User Defined Beeper Duration 100 ms
Code per Scan One code per scan
Central Code Transmission Enabled
Order by Code Length Disabled
Order by Code Symbology Disabled
Autoscan Mode Disabled
Autoscan Aiming System Enabled
Autoscan Hardware Trigger Enabled
Autoscan Illumination System Disabled
Safety Time 500 ms (if Autoscan mode or Flash on/off are
enabled and only one code can be read per
image).
Image Formatting
Image Format Jpeg format
Image Size VGA (640x480)
Set Jpeg Quality Factor 50