Datalogic DS8110, Reference Manual

Page: 69 / 282

E-GENIUS
57
4
Field Name Action/Definition
System Info
System
Description
Enter a name to identify this scanning system in the text field.
ID Click ID to visually identify a scanner in an array/tunnel. When clicked, all the
scanner lasers will turn off except for the selected scanner, whose laser will blink
for 20 seconds.
Edit
Select to
Remove, Reassign, Add, or Replace from the
Edit drop-down list to
complete the following actions:
 Remove: When selected, you can select the scanner to remove from the
Dev/MAC Address drop-down list. Click OK to remove the selected scanner
from the system.
 Reassign: When selected, the Dev column of the selected slave scanner
(selected with ID) presents a drop-down list of Dev numbers. Select a
different number to reassign the scanner.
 Add: This is an option under the Edit drop-down list in the Unconfigured
Devices
section of the screen. Click
OK
to add the selected device to the
system.
 Replace: This is an option under the Edit drop-down list in the
Unconfigured Devices
section of the screen. When selected, you can select
from a list of slave scanners (Those with a gray indicator, meaning the unit is
not connected) in the system using
MAC Address
and
Dev
drop-down lists.
Click
OK
to replace the selected scanner with the
Unconfigured Device
.
Send Barcodes
to Non-Singulated
Dimensioning
System Select the checkbox to enable Non-Singulated Dimensioning System Info options
(currently not available for Standalone or Multi-head DM3610 systems).
IP Address Enter the device IP Address.
Port Number Enter a port number for the device.
Enable Tach
Sync Select the checkbox to enable encoder/tachometer syncing between system
devices.
3. When you have finished making changes, click
Update All to save all pending changes,
click Reset All to revert to all previously saved values, and click Reset Page to revert to
previous saved values on the current page. 0.
Additional Devices