Datalogic DS8110, Reference Manual, Page: 36 / 282

DS8110 REFERENCE MANUAL
24
3
3.2 CONNECTING A DS8110 SCANNER
To install a DS8110 barcode scanner, follow this sequence:

Complete mechanical installation (See Chapter 2.)

Complete electrical installation (See wiring illustrations provided in this chapter.)

Observe all electrical safety requirements outlined in this chapter.

Ground the mounting structure to protective earth (PE) ground.

If used, wire the photoelectric sensor (or other trigger) to the CBX510 connection
box/SC5000.

Wire the tachometer to the CBX510 connection box/SC5000 (if used).

Wire serial ports to the CBX510 connection box/SC5000 if needed.

Connect the M12 end of the Ethernet cable to the scanner’s HOST port and network
switch as required by your application.

Connect the scanner to its power supply.

Connect the power supply to the power source.

Setup / check scanner operations (See Chapter 5.)