Datalogic DS5100-X200, Reference Manual

Page: 158 / 164

DS5100 REFERENCE MANUAL
142
C
C CONNECTIONS FOR PROFINET-IO MODELS
ON-BOARD PROFINET-IO CONNECTORS (2)
Two Standard M12 D-Coded female connectors are provided for the on-board PROFINET-IO
connection. This interface is IEEE 802.3u 100 BaseTx compliant.
Use accessory ETH CABLE M12-M12 cables or Cat 5e or superior cables.
Figure 86 - M12 D-Coded 4-pin Female PROFINET-IO Network Connector
On-Board Ethernet Network Connector Pinout
Pin Name Function
1 TX + Transmitted data (+)
2 RX + Received data (+)
3 TX - Transmitted data (-)
4 RX - Received data (-)
POWER + INPUT (TRIGGER)
Figure 87 - M12 A-Coded 5-pin Male Power Connector
Power Connector Pinout
Pin Name Function CS-A1-02
1 Vdc Power supply input v Brown
2 I1A External Trigger Input (polarity insensitive) White
3 GND Power supply input voltage - Blue
4 I1B External Trigger Input (polarity insensitive) Black
5 NC Not Connected nc
The CS-A1-02 or AS-I accessory power cables can be used to connect to the power source.
The CS-A1-02 cables can also be used to connect to the input trigger signal.
3
4
1
2
1
4
3
2
5