Datalogic Arex 30W User Manual Download Page 10

Page: 10 / 96

AREX

30W – 50W

1 CONTENTS OF THE PACKAGING

1.1 UNPACKING

When unpacking the marking system from the shipping carton you should:

•

Remove the documentation from the top of the marking system

•

Remove the accessories

•

Carefully remove the marking system from the packaging using both hands

WARNING!

Be extremely careful to not damage the connection cable between Scan Head and Rack.

Figure 2: Unpacking.

Before installing or operating the marking system, you should:

•

Inspect the shipping container for damage

•

Inspect the marking system for signs of damage

•

Confirm that the shipping carton contains all items on the shipping inventory list including any
accessories

Retain all packaging materials until the marking system has been inspected for completeness and damage,
and you have checked the operating performance. If anything is missing or defective, see chapter 7 for
contact details.

Summary of Contents for Arex 30W

































































































Search results

Summary of Contents for Arex 30W

Reviews:

Related manuals for Arex 30W

Brands by name

Popular brands

Datalogic Arex 30W, User Manual

Search results

Summary of Contents for Arex 30W

Reviews:

Related manuals for Arex 30W

Brands by name

Popular brands