Datakom DKG-519 User Manual Download Page 22 | Manualshive

Page: 22 / 55

background image

DKG-519 User Manual V-27

(14.04.2011)

- 22 -

6.16 Remote Monitoring and Programming

Thanks to its standard serial RS-232 port, the unit offers the remote monitoring and

programming feature.

The remote monitoring and programming PC software is called RAINBOW and may be

downloaded from

www.datakom.com.tr

internet site with

password login

.

The modem, SMS and Modbus modes are not compatible with the local PC connection.

Modem

Enable

,

SMS Enable

and

MODBUS Address

program parameters should be set to 0 before

connection.

The RAINBOW software allows the visualization and recording of all measured parameters.

The recorded parameters may then be analyzed graphically and printed. The software also allows the
programming of the unit and the storage of the program parameters to PC or the downloading of
stored parameters from PC to the unit.

For PCs without a serial port, below USB to serial adapters are tested and approved :

DIGITUS USB 2.0 TO RS-232 ADAPTER (PRODUCT CODE: DA70146 REV 1.1)
DIGITUS USB 1.1 TO RS-232 ADAPTER (PRODUCT CODE: DA70145 REV 1.1)
FLEXY USB 1.1 TO SERIAL ADAPTER (PRODUCT CODE BF-810)
CASECOM USB TO SERIAL CONVERTER (MODEL: RS-01)

The necessary PC connection cable will be supplied by DATAKOM. The cable length should

not be over 3 meters.

6.17 External Control of the Unit

The unit offers total external control through programmable digital inputs. Each digital input may

be programmed for below functions:

- Force OFF mode

- Force AUTO mode

- Force TEST mode

- Force LOAD TEST mode

- Disable Auto Start

- Force to Start

- Fault Reset

- Alarm Mute

- Panel Lock

External mode select signals have priority on mode buttons of the unit. If the mode is selected by

external signal, it is impossible to change this mode with front panel keys. However if the external mode
select signal is removed, the unit will revert to the last selected mode via pushbuttons.

It is also possible to lock the front panel completely for remote command.

«
...
20
21
22
23
24
...
»

Summary of Contents for DKG-519
























































Reviews:

No comments

Related manuals for DKG-519

Brand: OmarLift Pages: 14

Brand: Abicor Binzel Pages: 8

Brand: D+H Pages: 14

Brand: OMC Pages: 18

Brand: Paradox Pages: 2

Brand: Paradox Pages: 2

FrameSaver 9120

Brand: Paradyne Pages: 20

VeriSafe VS2-NET

Brand: Panduit Pages: 6

Brand: Rabbit Pages: 38

Brand: IBM Pages: 214

Brand: STIEBEL ELTRON Pages: 44

Brand: Desoutter Pages: 74

Brand: jablotron Pages: 2

Brand: Allen-Bradley Pages: 16

Brand: D+H Pages: 2

WFHC 06Z 02 HC RF 24

Brand: Watts Pages: 18

Brand: Waters Pages: 39

DHI-IPMECD-3021 Series

Brand: Dahua Technology Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands