DKG-108 User Manual V-1.0
(10.08.2011)
-2-
Electrical equipment should be installed only by
qualified specialist. No responsibility is assured by the
manufacturer or any of its subsidiaries for any
consequences resulting from the non-compliance to
these instructions.
Check the unit for cracks and damages due to
transportation. Do not install damaged equipment.
Do not open the unit. There is no serviceable parts
inside.
Fuses must be connected to the phase voltage
inputs, in close proximity of the unit.
Fuses must be of fast type (FF) with a maximum
rating of 6A.
Disconnect all power before working on equipment.
When the unit is connected to the network do not
touch terminals.
Short circuit terminals of unused current
transformers.
Any electrical parameter applied to the device must
be in the range specified in the user manual.
Do not try to clean the device with solvent or the like.
Only clean with a dump cloth.
Verify correct terminal connections before applying
power.
Only for front panel mounting.
SAFETY NOTICE
Failure to follow below instructions will result in
death or serious injury
