Datacom DM991C, Product Manual

Page: 54 / 89

Product Manual - DM991 Series V Family - 204.4092.08 54
10.6.1. G.shdsl Interface Test Menu
# --------------------------------------------------------------------------
# D A T A C O M [ 1 ]
# DM991C - G.SHDSL Modem - E1 and V.35 Interfaces
# --------------------------------------------------------------------------
# G.SHDSL Tests
#
# 1 - Stop testing
# 2 - Start LDL test
# 3 - Start LAL test
# 4 - Start RDL test
# 5 - Start BERT test
# 6 - Insert BERT error
# 7 - Reset BERT counters
#
#
#
#
# Current test status :[ Not running ]
#
# Option: [ ]
#
# --------------------------------------------------------------------------
# <P>revious <ESC> Exit <ENTER> Refresh <N>ext
# --------------------------------------------------------------------------
•
1 - Stop testing: disables the current test.
•
2 - LDL: starts LDL tes.
•
3 - LAL: activates LAL test, (can only be run in the local equipment).
•
4 - LDR: starts LDR test.
•
5 - Initiate BERT sequence: activates BERT test.
•
6 - Insert BERT error: generates bit error in the BERT sequence being transmitted.
•
7- Reset BERT counters: resets counters of total time and test error time.
10.6.2. Digital Interface Test Menu
# --------------------------------------------------------------------------
# D A T A C O M [ 1 ]
# DM991C - G.SHDSL Modem - E1 and V.35 Interfaces
# --------------------------------------------------------------------------
# V.35 Tests
#
# 1 - Stop testing
# 2 - Start LDL test
#
#
#
#
#
#
#
#
#
# Current test status :[ Unavailable ]
#
# Option: [ ]
#
# --------------------------------------------------------------------------
# <P>revious <ESC> Exit <ENTER> Refresh <N>ext
# --------------------------------------------------------------------------
•
1 - Stop testing: disables the current test.
•
2 - LDL: activates LDL test.