5
PREPARATION OF REMOTE CONTROLLER
OPERATION SCOPE OF THE REMOTE CONTROLLER
USEFUL PROMPT
To prolong the useful life of this machine, the interval of the continuous switch action must be
above one minute
The parameter of using power source should be squared with which indicated on the rear panel,
or the machine will work improperly and even be ruined
When the picture that the unexpected non-respondency happening, please turn on the machine
again
To maintain the suitable antenna installation position, proper antenna installation angle,
adequate antenna earthing, the normal antenna anti-interference measure; and should keep the
earthing of the outdoor antenna separating with the indoor equipment’s
Load the batteries to the groove of the remote
controller and then enable you to operate the native
1.
Open the lid
Load the batteries (AAA type) and attend
whether the anode and cathode of battery
are corresponding to the polarity indicated
on the remote controller
Close the lid
Make the controller toward the inductive window of
native and then punch the keys
1.
Distance: about seven meters in front of
the inductive window
2.
Angle: about 30 degree right or left refer
to the frontispiece of the native’s front
panel
INDUCTIVE WINDOW OF FRONT PANEL
Summary of Contents for Datacom DT-103
Page 9: ...7 MENU TREE ...