Datacom Datacom DT-103, Operation Manual

Page: 12 / 23

10
tapes show together a certain length and whether the lock
indicator lights up simultaneously.
Light the sixth tape; punch the +/- key to switch the status
between “
on ” and “ off ”, punch the OK key to enter the
motor interface when the “ on ” status is being chosen and
the interface shows as
Light the seventh instruction tape; punch the
OK key to
reveal a inquire window with a sentence “ARE YOU
SURE?” Use pressing the red key to confirm and the
green one to give up
Light the fourth instruction tape to punch the +/- key to
choose one of the three instructions:
Off, West, and East .
Punch the OK key to confirm. Therein:
1. West : to limit the westward limit of the
dish-adjustment
2. East : to limit the eastward limit of the dish-adjustment
3. Off : to give up the limitation set
Light the Position auto , Move dish , Step move ; the
functions of these three instructions are to adjust the
direction of dish, hereinto:
1. Position auto : the drive instruction will not be
stopped until to punch the OK key
2. Move dish : to drive the dish to adjust a relative
biggish range
3. Step move instruction is to modify a relative minor
range
What we according to of adjustment is the Quality tape
show its longest length, in which:
=>E : to drive the dish to the east direction
=>W : to drive the dish to the west direction
=>Stop : to stop the adjustment
After adjustment
˖
1. Light the fifth instruction tape Store position , force
down the digit-keys to input the adjusted situation
(position) code and then punch the OK key to save
the code
2. Light the sixth instruction tape Goto position , use
input the code digit to drive the dish to the situation
where has saved