16
Lock TV Channel
:
return the
Lock Setup
interface and
light the
Lock TV Channel
instruction, the image shows
Punch the
OK
key to enter its interface which is similar with
the
Edit TV Channel,
punch the
Ʒͩ
key to select the
channel and punch the
yellow
key to add one “
lock
”
symbol on the end of installing channel name tape. Just as
the right side image indicates. Punch the
yellow
key once
more on the locking tape to unlock
Lock Radio Channel:
as same as above-mentioned
Lock Receiver
: move the cursor onto the forth instruction
tape, punch the +/- key to switch the receiver mode
between locked and free. When the machine has been
locked, starting machine from standby or power-on status
needs the right code input
Lock Edit & Installation
: move the cursor onto the fifth
instruction tape, punch the +/- key to switch the receiver
mode between locked and free, when the mode is locked,
enter the sub-menu of
Installation
,
Edit
,
etc.
need the
right code input
ADVANCED SETTING
Return to the
Main Menu
interface and light the
Advanced
Installation
menu, punch the
OK
key to enter its sub-menu
and the image shows:
The relative introduction of
Edit/Add SAT/TP
refer to the
relative segment in
EDIT
Move the cursor onto the
Reset (Factory Default)
and
punch the
OK
key, the image shows as
Punch the
red
key to complete the
Reset
instruction
Attention
: all the installation and parameter former set will
be cleared completely
ʽ
Summary of Contents for Datacom DT-103
Page 9: ...7 MENU TREE ...