14
Change
: punch the
yellow
key, the picture shows:
Light the
Satellite
tape and punch the
OK
key to enter the
soft-keyboard
interface:
Use the
Ʒͩ
, +/- key to move the cursor and the
OK
key
to confirm the input
Use
CAPS
instruction to switch the letter state between
capital and miniscule
Use
NUM
instruction to switch the mode from letter to digit
and special symbol
After inputting, move the cursor onto the
Save
instruction
and punch the
OK
key to save the installation
Light the
TP frequency
; punch the +/- key to choose the
appropriate stored transponder parameter of
TP frequency
,
LNB polarization
,
Symbol Rate
that belong to the
selected satellite or, directly, punch the
digit-keys
to
complete the value input of TP frequency, LNB polarization,
Symbol Rate
Light the
Channel Name
menu tape; punch the +/- key to
choose the channel’s name which belong to the choosing
transponder, punch the
OK
key to appear the
soft-keyboard
to rename the channel name which
operation just as above-mentioned about
soft-keyboard
introduction. Light the
Video PID, Audio PID,
and
PCR
instruction tape and punch the
digit-keys
to input the
correct value
Add
: return to the
Edit Satellite
interface and punch the
blue
key, the picture shows as:
Punch the
OK
key to reveal the
soft-keyboard
to define
the satellite name, finish the definition, input one-group
parameter of
TP frequency
,
LNB polarization
and
Symbol Rate
, punch the
OK
key to save the installation
and the new satellite will be added meanwhile. Check the
added satellite in the
Select Satellite
menu interface pls
Summary of Contents for Datacom DT-103
Page 9: ...7 MENU TREE ...