Datacom Datacom DT-103, Operation Manual

Page: 11 / 23

9
Punch the MENU key to return to the Select Satellite
interface, punch the red key and
Ʒͩ
key to select one
or more the satellites and punch the blue key to enter the
Satellite interface ( right side) to scan the chosen satellite
or satellites
Move the cursor onto the Satellite tape, punch the +/- key
to select the selecting satellite (note: only two or more the
satellites in
Select Satellite interface have been selected,
this item has the selectivity) name which above-mentioned
Move the cursor onto the
LNB type tape, therein, eight
types, punch the +/- key to select the suitable one or,
punch the
OK key to enter the LNB setting interface, the
image as:
Light the LNB index (1.8) to choose one type name (for
example, Type 1 is as indication)
Light the LNB Freq. Low and LNB Freq. High menu tape,
punch the +/- key to install the parameter by referring to
the frequency value of tuner on the antenna or the
digit-keys to input the digits directly, finish installing, force
down the OK key to save the installation
Light the DiSEqC tape to select the port through pressing
the +/- key; the DiSEqC parameter of the port must be
consistent with the actual input terminal of the present
satellite antenna
Attention:
LNB Power:
Single machine situation: keep the status on
the “ on ”
Loop situation: keep the status of the
machine which connecting the satellite signal
on the “
on ” and others on the “ off ”
Punch the MENU key to return the interface to the Satellite
one as above, light the TP Freq., punch the +/- key to
choose the suitable parameter of TP Freq. , TP Polar , TP
SR or, punch the digit-keys to input the correct value
which what we according to are either Quality or Level