RP90 Plus E and RL90 User Guide
73
Ventilation clearance
To ensure proper ventilation to the printer and laminator, maintain minimum
clearance distances as shown.
Sides: 8” (20mm)
Back: 4” (10mm)
•
Keep paper and
foreign
materials off the
printer.
•
Place the
printer on a
stable platform
•
Do not place in
areas
susceptible to strong vibration or shock.
•
Keep all dust, dirt, food, liquids, etc. away from the printer at all times.
Storage Environment for supplies
Follow these guidelines when storing supply rolls:
•
Store supplies in their original packaging until you are ready to use
them.
•
Choose a location away from direct sunlight, with a temperature
between 41° F and 77° F (5° C and 25° C) with a maximum of 40% to
60% relative humidity.
•
Do not store supplies in direct sunlight or high humidity locations.
•
The print ribbon maintains its quality for about one year. For optimal
card quality, purchase and store quantities that you can use up in less
than a year.
•
The print ribbon and card stock might require secure storage and
tracking. Follow your policy for storing and tracking the supplies used
to make cards.
•
Supply rolls should be at room temperature when they are installed in
the printer and used. If supplies are stored in a cooler environment
than the printer, allow supplies to reach room temperature before
using.
•
If the printer will not be used for an extended period of time, remove
supplies from the printer and store them with new supplies.
Summary of Contents for RP90
