DataCard CR500, Installation And Administrator'S Manual

Page: 75 / 106

CR500 Instant Issuance System Installation and Administrator’s Guide 61
Vital Product Data
The VitalProductData settings allow WebService access level users to change information about
the printer or system in specific circumstances. Contact your service provider should it become
necessary to modify the VitalProductData settings.
FrontPanel
Use the Printer Setting menu FrontPanel options to customize the security enclosure touch
screen.
PowerSaverMode Power off the retransfer roller in the print unit after the specified
number of minutes of no activity. Power off requires a warm up
period before the printer is ready to print cards again. A value of Off
keeps the retransfer roller heated whenever the printer is on.
However, keeping the roller on can keep supplies very warm.
Range: Off, 5, 30, 60 minutes
Default: 30 minutes
WebServerSecure Allow access to Printer Manager (the web server) through the secure
port.
Default: Enabled
Caution: Do not disable the web server. If the web server is disabled,
the printer cannot receive communications. To reverse this action,
you must contact Entrust Datacard for a DPCL application.
Option Description
BacklightBrightness Allows you to adjust the LCD front panel backlight brightness level.
Range: 0 percent (no backlight) to 100 percent (bright)
Default: 100 percent
LcdConfigMenu Enable or disable the Configuration menu display on the LCD touch
screen.
Default: Enabled
The Status and Maintenance menus cannot be disabled.
LedRibbonLow Set the percentage of ribbon remaining before being notified that the
ribbon is low and should be changed.
Range: 0 to 100
Default: 10 percent
Option Description