DataCard CR500, Installation And Administrator'S Manual

Page: 59 / 106

CR500 Instant Issuance System Installation and Administrator’s Guide 45
Set Up CardWizard Issuance Software
Refer to the Datacard CardWizard Issuance Software and Card Printer Setup Guide for complete
information about how to define the CR500 card printer to CardWizard issuance software.
Printer Use Guidelines
With the card printer fully set up and operational, keep these guidelines in mind when using the
printer:

Keep the printer powered off and covered when not in use. Leaving power on for long
periods without printing might allow fine dust to collect inside the printer. The dust can
adhere to cards and cause print blurring.

Store all supplies in a clean, cool, and dry location and in the original packaging until you load
them in the printer. Keep the original packaging closed.

Do not use supplies or cards that have been dropped on the floor or have otherwise become
contaminated.

Keep all food and liquids away from the printer.

Keep paper and foreign materials off the printer.

When cleaning around the printer, prevent debris from entering the printer.