background image

 

NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-HDIPUS Manual v1.0 

      Page 3

 

 

SAFETY PRECAUTIONS 

 

The presence of this symbol is to alert the installer and user to the presence of 

uninsulated dangerous voltages within the product’s enclosure that may be of 

sufficient magnitude to produce a risk of electric shock. 

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

DEVICE TO RAIN OR MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING 

TO QUALIFIED PERSONNEL ONLY.

 

  DO NOT apply power to the unit until all connections have been made, all components have been 

installed and all wiring has been properly terminated. 

  DO NOT terminate, change or uninstall any wiring without first disconnecting the unit’s power 

adapter from the device. 

  This device is supplied with the appropriately rated 12VDC power supply with the center pin 

positive.  The use of any other power supply could cause damage and invalidate the 

manufacturer’s warranty. 

  DO NOT power on the unit until all cables and connections to the device have been properly 

connected.  

  The device should be installed in an environment consistent with its operating temperature 

specifications. Placement next to heating devices and ducts is to be avoided as doing so may 

cause damage. The device should not be placed in areas of high humidity. 

  DO NOT cover any of the device’s ventilation openings. 

 

If the device has been in a cold environment allow it to warm to room temperature for at least 

2 hours before connecting 

power.  

 

 

PACKAGE CONTENTS 

This package contains: 
 

  One DT-HDIPUS IP Streaming Server 

  One Power Adaptor 

  One installation / configuration manual (An eManual will be supplied) 

 
Inspect the package before starting installation to ensure there is no damage and all supplied 

contents are present. Contact your distributor or dealer if the device is damaged or package contents 

are incomplete. 
 
 

Summary of Contents for DT-HDIPUS































Reviews: