NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-HDIPUS Manual v1.0
Page 14
Enable Closed Captioning
Steps to Enable Closed Caption:
1.
Connect Video source to HDMI or YPbPr (Component) port(s).
2.
Connect Video with supporting Closed Caption source to CVBS port.
3.
A supporting Closed Caption Player/TV must be used for this function.
Insert Closed Captioning Support device into the CVBS (Composite) Port
Enable/Disable Closed Caption Functionality by checking the Checkbox as
shown above.
Note:
Even with Closed Captioning enabled in the encoder, no closed captioning
will appear with source video disconnected.
'Save and Confirm'
the changes made on the Encoder Page.
Note:
To reset all changes made or saved go to the Administration Page and select “
Reset to Default”.
After pressing the '
Save and Confirm'
button- the user will be brought back to the Overview page.
Leaving the encoder page without saving changes will cause the previous settings to be used.
