NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-HDIPUS Manual v1.0
Page 8
Connecting to the GUI Interface:
Factory Default IP: 192.168.1.9
1.
Connect an Ethernet cable directly (
no Cross Over cable required
) to the Web Management
Port on the rear panel of the encoder or connect the Ethernet cable to an Ethernet switch.
Connect an Ethernet Cable to your PC/Laptop.
2.
Modify your PC/Laptop IP address to 192.168.1.100.
3.
Enter ‘
192.168.1.9:8888’
into your web browser.
4.
Enter GUI and make required device changes.
5.
Save all changes as required, upload and reboot changes.
6.
Verify parameters then end web session.
Overview / Welcome page
displays current status of the encoder including Input type, Output format type,
Output Bitrate, Actual Output, Encoder Status, and # of connected Clients.
