NACE: 610-429-1511 | [email protected] | www.datatronix.biz | DT-HDIPUS Manual v1.0
Page 6
INSTALLATION
System Installer must adhere to Article 820-40 of the NEC that provides
guidelines for proper grounding and specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable
entry as possible
.
UNPACKING and INSPECTION
Each unit is shipped factory tested. Ensure all items are removed from the container prior to
discarding any packing material.
Thoroughly inspect the unit for shipping damage with particular attention to connectors and controls.
If there is any sign of damage to the unit or damaged or loose connectors contact your distributor
immediately. Do not put the equipment into service if there is any indication of defect or damage.
HARDWARE INSTALLATION and CONNECTIONS
It is highly recommended that quality cables and connectors be used for all video and audio
source connections
1. Connect the media source (Satellite STB, Media player, or other media device) to the HDIP
streaming server by HDMI, YPbPr (Component), or CVBS (Composite) cables.
2. Connect the HDIP streaming server to local area network (LAN)
3. Plug the power adapter to the device and power up
4. Network Setup
5. There are three (3) use cases supported by HDIP streamer: DLNA media server,
UDP/RTP/ multicasting, and TCP/UDP/RTP/ unicasting.
