manualshive.com logo in svg

Data Translation DT3153, User Manual

Share
Download
Data Translation DT3153 User Manual Download Page 24

Chapter 2

8

Video Formats

 The following video formats are supported for composite inputs:

• NTSC/RS-170 

−

 Standard for 60 Hz video signals. In this format, 

the video input is a single analog signal. A video frame is 
displayed as 640 x 480 lines.

• PAL 

−

 Standard for 50 Hz video signals. In this format, the video 

input is a single analog signal. A video frame is displayed as 768 
x 576 lines.

The Y/C format is supported for S-video inputs. In this format, the 
video input is provided as two separate analog signals. The Y signal 
contains luminance information (the gray scale portion of the color 
image). The C signal contains chrominance information (the color 
portion of the image). For 60 Hz, a video frame is displayed as 640 x 
480 lines. For 50 Hz, a video frame is displayed as 768 x 576 lines.

Videos Input Channels

The DT3153 provides three video input channels that you can use as 
follows:

• Three composite video inputs, connected to channels VID0_IN, 

VID1_IN, or VID2_IN; or

• One S-video input and two composite video inputs. For the 

S-video input, connect the Y signal to channel VID1_IN; connect 
the C signal to the CHROM_IN channel. You can then connect 
composite video inputs, if desired, to the two unused video input 
channels.

Through software, the video multiplexer on the board determines 
which channel or channels are digitized. By default, channel 0 
(VID0_IN) is selected.

Summary of Contents for DT3153













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands