Data Translation DT3153, User Manual

Page: 122 / 140

Appendix C
106
5. Uncheck all checkboxes, then click Next .
6. Click Finish .
The Technial Support page appears.
7. Click Cancel .
8. Open the Control Panel.
9. Double-click Sounds and Audio Devices .
10. Click Hardware.
11. Double-click DT-Open Layers DT3153 MACH Series Frame
Grabber .
12. Click Properties .
13. Double-click Multimedia Drivers .
14. Click DT3153 MACH Series Frame Grabber , then click
Properties .
15. Click Settings .
16. Click Add New to add a DT3153 board to the configuration.
The DT3153 Installation dialog box appears for the new board.
17. Enter any unique name (or alias) for the DT3153 board, then click
Add . Only one alias per installed board is allowed.
The DT3153 Configuration dialog box appears.
18. Select Enable Board to activate the board. If you want to retain
the settings but disable the board (and therefore not use the
memory), remove the checkmark next to Enable Board.
19. Select the Video Format as either 50 Hz or 60 Hz.
20. For Desired Memory Size , select the amount of contiguous
memory (in MB) that you want to allocate in your system to hold
the acquired frames. A 60 Hz, 640-by-480 image requires 1.2 MB
per frame; a 50 Hz, 768-by-576 image requires 1.7 MB per frame.
The actual amount of memory that the device driver can allocate
depends on your system resources. It is recommended that you
select only as much memory as you need to leave memory for