Data Translation DT3153, User Manual

Page: 117 / 140

Modifying the Device Driver
101
C
C
C
C
C
C
C
C
C
20. Click Done .
The DT3153 Device Driver Configuration dialog box is redisplayed
with the name of the board you just added.
21. Click Close to finish.
A dialog box appears, indicating that you must restart Windows 2000
for the changes to take effect.
22. Click Restart Now to restart your system.
Modifying a Board in the Device Driver
Configuration
To modify the board settings in the DT3153 Device Driver
configuration, perform the following steps:
1. Open the Control Panel .
2. Double-click Sounds and Multimedia .
3. Click the Hardware tab.
4. Click DT3153 MACH Series Frame Grabber , then click
Properties .
5. Click the Properties tab.
6. Double-click Multimedia Drivers .
7. Click DT3153 MACH Series Frame Grabber , then click
Properties .
8. Click Settings .
9. Select the name of the board that you want to modify, then click
Modify .
Another DT3153 Device Driver Configuration dialog box appears.
10. Select Enable Board to activate the board. If you want to retain
the settings but disable the board (and therefore not use the
memory), remove the checkmark next to Enable Board.