Data Translation DT3153, User Manual

Page: 123 / 140

Modifying the Device Driver
107
C
C
C
C
C
C
C
C
C
other devices. Once you enter the desired memory size, the
device driver allocates as much memory as possible to match the
value you entered; the actual memory size allocated is shown in
the
Actual Memory Size text box when you restart your system.
21. Click Done .
The DT3153 Configuration dialog box is redisplayed; you can see the
name of the board you just added.
22. Click Close to finish.
A dialog box appears, indicating that you must restart Windows XP for
the changes to take effect.
23. Remove the Imaging OMNI CD from the CD-ROM, then click
Restart Now to restart the system.
Modifying a Board in the Device Driver
Configuration
To modify the board settings in the DT3153 Device Driver
configuration, perform the following steps:
1. Open the Control Panel .
2. Double-click Sounds and Audio Devices .
3. Click Hardware .
4. Double-click DT3153 MACH Series Frame Grabber .
5. Click Properties .
6. Click the Properties tab.
7. Double-click Multimedia Drivers .
8. Click DT3153 MACH Series Frame Grabber , then click
Properties .
9. Click Settings .