Data Translation DT3153, User Manual

Page: 111 / 140

Modifying the Device Driver
95
C
C
C
C
C
C
C
C
C
5. Click Search for the best driver for your device
(Recommended) , then click Next.
6. Click Specify a location and uncheck all other options.
7. Insert the Imaging OMNI CD into the CD-ROM drive.
8. Click Browse , browse to x:\DRIVERS\DT3153\WIN98 (where
x is the letter of your CD-ROM drive) , and click Open .
9. Click OK .
10. Click Next.
11. Click Next.
The files are copied.
12. Click Finish .
13. Remove the Imaging OMNI CD from the CD-ROM, then click
Yes to restart the system.
When the system restarts, the driver configuration dialog box appears.
14. Click OK , then click OK .
15. Click Add New to add a DT3153 board to the configuration.
The DT3153 Installation dialog box appears for the new board.
16. Enter a board name (alias), which can be any name you choose,
then click
Add . (The board name is used by supported software,
such as DT-Acquire and the Frame Grabber SDK.) Only one
name (alias) per installed DT3153 board is allowed.
The DT3153 Configuration dialog box appears.
17. Select Enable Board to activate the board. If you want to retain
the settings but disable the board (and therefore not use the
memory), remove the checkmark next to Enable Board.
18. For Video Format , indicate the video format of your video input
source: 50 or 60 Hz.