Data Translation DT3152-LS, User Manual

Page: 181 / 214

Modifying the Device Driver
165
C
C
C
C
C
C
C
C
C
b. Click the 2 Dimension tab of the DT3152LS Configuration
dialog box.
c. For Video Format , indicate the video format that you want
for the default setting by clicking 50 Hz or 60 Hz .
d. For Memory Size , select the amount of memory (in MB) that
you want to allocate in your system to hold the acquired
frames. A 60 Hz, 640-by-480 image requires 308 KB per
frame; a 50 Hz, 768-by-576 image requires 443 KB per frame.
The upper limit depends on your system’s resources.
The
recommended minimum is 1 MB.
11. To configure the board for line-scan (one-dimensional)
operations, perform the following steps:
a. Click the General tab of the DT3152LS Configuration dialog
box, and then click Enable Line Scan Mode .
b. Click the Line Scan tab of the DT3152LS Configuration
dialog box.
c. Enter the number of 500 KB FIFO buffers to use. A typical
number is nine FIFO buffers.
The default is 0. If, when running your program, you encounter
overflow errors, increase the number of FIFO buffers.
Note: In the DT3152LS Configuration dialog box, you can
enable the board for both 2 Dimensional Mode and Line Scan
mode at the same time. However, to maximize system memory,
enable only one mode at a time.
12. Click OK .
The DT3152-LS Device Driver Configuration dialog box is redisplayed;
you can see the name of the board you just added.