Data Translation DT3130 Series, User Manual

Page: 138 / 160

Appendix C
122
Uninstalling the Device Driver
Generally, you will always require the DT3130 Series Device Driver.
However, if you are no longer using the DT3130 Series with the
supported software, you can uninstall the DT3130 Series Device
Driver from the system by performing the following steps:
1. Open the Control Panel, and double-click System .
2. Click the Device Manager tab.
3. Double-click DT Image Device .
4. Click DT3130 Series Secondary Device , then click Remove .
The Confirm Device Removal dialog appears.
5. Click OK to confirm the removal.
6. Click DT3130 Series Frame Grabber , then click Remove .
The Confirm Device Removal dialog appears.
7. Click OK to confirm the removal.
8. Repeat steps 6 and 7 until all DT3130 Series frame grabber boards
have been removed.
9. Close the System dialog box.
10. From the Control Panel, click Add/Remove Programs .
11. Click DT3130 Series Drivers for Windows 98 and Me , then click
Add/Remove .
12. Click Yes to remove read-only files.
13. Click Finish .
14. Close the Control Panel.
15. Turn your computer off and remove any DT3130 Series boards.
Note: If you want to reinstall the device driver after removing it,
refer to the DT3130 Series Getting Started Manual for instructions.