Data Translation DT3130 Series, User Manual

Page: 137 / 160

Modifying the Device Driver
121
C
C
C
C
C
C
C
C
C
9. Select the DT3130 Series device to configure.
Note that the DT3131 and DT3131-ISO boards contain one device; the
DT3132 and DT3132-ISO boards contain two devices; and the DT3133
and DT3133-ISO boards contain three devices. Device 1 corresponds to
channels 0, 1, and 2; device 2 corresponds to channels 3, 4, and 5; and
device 3 corresponds to channels 6, 7, and 8.
10. Select the Video Format as either 50 Hz or 60 Hz.
11. When you are finished, click Done .
If you made any changes, the Save Changes dialog box appears.
12. If you want to save your changes, click Yes .
Modifying a Board in the Device Driver
Configuration
To modify a board in the device driver configuration, perform the
following steps:
1. Open the Control Panel.
2. Double-click the DT Imaging Control icon.
3. Select the DT3130 Series device to configure.
Note that the DT3131 and DT3131-ISO boards contain one device; the
DT3132 and DT3132-ISO boards contain two devices; and the DT3133
and DT3133-ISO boards contain three devices. Device 1 corresponds to
channels 0, 1, and 2; device 2 corresponds to channels 3, 4, and 5; and
device 3 corresponds to channels 6, 7, and 8.
4. Select the Video Format as either 50 Hz or 60 Hz.
5. When you are finished, click Done .
If you made any changes, the Save Changes dialog box appears.
6. If you want to save your changes, click Yes .